Problem with Korpus Midi Control

[Pacocreative]

Hey,

I’m configuring LL6 for a performance and got stuck with something fairly basic.
Generally I got most of the function working except for… record.
Using my Uno02 FCB1010 as a pedalboard, with my custom configurations.

I’m using CCs 70-90 range, all of them sending a single trigger at 127 value.

The problem is:
When I hit record in Korpus via UI button, it works properly. First click enables recording, second click stops it.
When I hit record in Korpus via Midi, it does not work properly – it only records a very short buffer and stops.
Using overdub via midi works fine – even on an empty buffer, it records until I hit overdub via midi again.

I made sure no double messages are sent.
I checked if triggering it via NoteOn works better, but the problem persists.
Buffers are clear, and in a free, unsynced mode.

Thanks.

[Philippe]

Hi Patrick,
Every Logelloop commands that have an action on long push needs to receive the note off equivalent.
This is the only way for Logelloop to now that you pushed the button for more than 300 ms…

So, you need to configure your Midi footboard to send a cc 0 when you release the button.
I think that is possible on every footboard.
On the FCB1010, I advise preferring Midi notes…
Tell me if this advice resolve your problem.

Sorry for not being clear enough in the soft. I will try to add information somewhere.
Best regard,
Philippe

[Pacocreative]

Hell yeah! This helped big time.
Solved all my issues across all modules!
Made my day!
Thank you so much!

[Author]

Posts